2 port IEEE802.3at (30 watts) Ethernet Single-port midspan

1.4 Port PoE Injector/Splitter. 2 PoE Ports 2,IEEE802.3at (30 watts) POE 3,Fast Ethernet:10/100/1000Mbps 4.factory price Products: SINOV-MIDSPAN-2-G , it is a POE Power over Ethernet Single-port midspan. It Support IEEE802.3at (30 watts). It has 4 RJ45 port, a power input ports. SINOV-MIDSPAN-2-G POE Power over Ethernet Single-port midspan is under the IEEE802.3at PES device automatically identification of effective function by electrical equipment , SINOV-MIDSPAN-2-G POE Power over Ethernet single-port midspan is monitoring equipment. Ethernet terminal equipment, industrial Ethernet sensors, wireless router, VOIP telephone systems and communications equipment Ethernet provides a simple, reliable, intelligent networking solutions for the system. Users with Ethernet equipment and Ethernet-powered devices can easy to solve project  installation unreliable power supply,bad power supply environment and a poor environment is difficult to set up construction of local power supply.  can compatible with all Ethernet POE (power over Ethernet system) power supply systems. Meanwhile, the system can avoid device open, short, and so fault can damage to the electrical equipment and the  Ethernet-powered devices provide remote power, power supply.        NOTE:            Not POE chip inside,not full support IEEE802.3at internat standard. only support POE power function. Compliance IEEE802.3at for POEThrough the network communication line does not ATfect the network bandwidth and transmission speed.Panel lights can reliably direct the state of equipment.Engineering installation easy, convenient, improve project quality and reduce costs.1  Comply with IEEE802.3 100BASE-T for Ethernet and IEEE802.3u 1000BASE-TX for fast Ethernet standards.2 Compliance IEEE802.3at for POE3 4 ports of half duplex /full duplex self -adapting RJ-45, with 100Mbps for each ports.4 2 POE ports , which can automatically identify the power (30Watts of each,max support 90 watts of each port)5  Each port supports MDI/MDIX, which can automatically adjust the buffer to balance the Ethernet loading and to avoid data package missing.6  Each port has auto detecting and correcting polarity ability7 Support MAC address auto-learning and auto-aging8 Panel lamp monitors the working status and helps to resolve faults easily9  Highly insure the data integrality and speed matching10 Highest speed for data transmitting and data filtering11 Strong compatibility in Ethernet application to keep user lowest cost

General
Standards	Suppurt IEEE802.3at POE
Data Transmit Rate	Ethernet:10Mbps(half-duplex)20Mbps(duplex)Fast Ethernet:100Mbps(half-duplex)200Mbps(duplex)
Physical Medium	100BASE-T:CAT3,4,5 UTP(max. length 100m )EIA/TIA-568 100ohm STP(max. length 100m)1000BASE-TX:CAT 5 or up UTP(max. length 100m)EIA/TIA-568 100ohm STP(max length 100m)
The number of Port	4 Port
Network port pin definitions	1,2 and 3,6 for the data pin. 4,5 feet to power is; 7-8 feet for the power supply negative
LED Display	Input power light (red), output power indicator (green)
Physical Environment
Input	DC AC100-240V ~50-60HZ
Operating Temperature	-20~70°c
Storage Temperature	-40 ~ 70°c
Humidity	5%~95% unfrozen
Dimensions	124*73*38mm
Net weight	0.7kg

 We are specialized in development and manufacture of POE Products: 1-24 port POE midspan ,POE switch ,PD ,PD module. We have our own technological R & D team, with nearly a 4000 square meters modern factory, welcome to visit our factory, wish to establish business relationship with you. We can customize and develop products according to the demand of customers. OEM&ODM are both welcomed.